A-1 Sewer & Septic Service performed the following services: - Upon arrival, we relocated the sewer line from the existing cleanout in the yard. - After the locations were proven accurate, we then excavated down to the sewer line upstream by the house as well as the location across the street by the sewer main. - Performed an approximate 50’ hole-to-hole pipe burst using HDPE (SDR 17). SDR 26 was then installed to connect HDPE to the 4” clay 1’ from the city tap downstream. - Upstream, the HDPE was connected to the existing 4” PVC pipe 2’ after the clean out. - All pipe was bedded in gravel before backfill to prevent any settling. - Backfilled both trenches in small lifts, compacting the dirt to get the ground as flat as possible. - Hauled off job-related spoils.