we need to run a shielded cable out of the right side cable end of the house, we need to tuck it in behind the existing leader pipe dropping down. we then need to put PVC conduit across the bottom of the house and under the deck, we then need to dig a small trench under the dirt walkway between the edge of the deck and the fence that blocks the equipment. we can then come up and either staple the wire to the back side of the fence and to the condenser, or we can continue running conduit over. it appears as both condensers are tied to the one wire coming down to the non-functioning condenser, the 24 volt signal from the furnace in the attic may be feeding both condensers.