Arrived to remedy an inoperable system. Upon inspection of the system found that the burners would not ignite all the way across the burner assembly. Removes burner assembly and cleaned the gas spuds as well as the burners themselves. Turned the system back on and allowed to run in high stage heat. Calibrated the gas valve to ensure the system is heating properly. Adjusted the system and tested operations in low state heat. System is functioning properly at this time. Went outside and found that the termination is questionable. Relayed my concerns and my questions to the office and they agree that the termination should be replaced. Coordinating with the office to set a time and date to perform the necessary repairs.