Arrived at the customers home to perform an AC maintenance. Upon arrival I put the system into cooling mode and began by checking static pressure. Static pressure passed at this time. I performed a CFM count which was also passing. I checked all electrical levels which were within manufacture specifications today. I inspected the blower wheel assembly for cleanliness and excessive play in the shaft. The blower wheel assembly looked good today. I performed a temperature split between the supply and return air which was 20 degrees. I moved to the outdoor unit and checked all electrical and refrigerant levels. Refrigerant levels were good today but I found the compressor to be drawing over the allowed amps on start up. I spoke with Jim about my findings and proposed installing a hard start kit to help the compressor on startup. I also recommended doing an extensive coil cleaning today. Jim decided he did not want to go with the options today. I washed the outdoor coil with water, and the