11-21-25 Spoke to Gary on site The two Modine unit heaters on the east end of the warehouse are not heating. The blower motor is running on both units. Thermostat is in the center. East warehouse area. One thermostat operates both units. Both units are melted in the corner of the warehouse standard cage on a Ford truck does not work. We would need to use a narrow scissor lift to access the backside of the burner area. 32” I did access the front of the unit heaters. I found the draft safety switch on both unit were tripped The panel to access these safeties has been moved to the side so this is happened before. I did reset both safeties both units came on and are running at this time. I didn’t feel any bad from either one of the units and I did also go up on the roof to take a look at the flue cap. Both have a high wind cap on them that it’s in good shape. I spoke to Gary concerning what I found they’ll keep an eye on it. If they have other problems with the units, we will need to