Young man came out and explained everything he was doing . Took his time with everything and came to me with what we needed to do to fix my issues. Great job Garret
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
I am a skilled professional that works for a Dor-Mar Heating & Air Conditioning company. I completed a furnace repair job for a customer. The furnace had been operating without any problems since the last visit. I replaced the inducer motor, gas valve, and dual pressure switch for the furnace. The inducer motor was under warranty, so I collected payment when the job was complete. The heating works properly now.
I am a skilled professional that works for a Dor-Mar Heating & Air Conditioning company. I recently completed a job at a residence where the customer had a water leak in the past and the gas valve had corrosion along with water stains on the inducer motor. I recommended replacing the gas valve, inducer motor, and pressures switches.
I was hired to upgrade a home's electrical system to support a mini split. The job involved running new wire from the main panel to the location of the mini split.
The thermostat in the customer's home was not working properly. I diagnosed the issue and determined that the thermostat was bad. I replaced the thermostat with a new one and tested it to ensure it was working properly. The customer was happy with the service and thanked me for my help.
I arrived at the client's home to perform a gas furnace maintenance checklist. I checked the furnace's electrical connections, inspected the gas pressure, and tested the thermostat. I also cleaned the furnace's burners and inspected the blower motor and blower wheel. Finally, I tested the furnace's ignition system and adjusted the gas pressure as needed.
I arrived at the customer's home and performed a gas furnace maintenance checklist. I checked the gas pressure, inspected the burners, cleaned the pilot assembly, and tested the thermostat. I also replaced the air filter and checked the electrical connections. Finally, I cleaned the exterior of the furnace and tested the operation of the blower motor.
I was called to a home to install a furnace. When I arrived, I noticed that the furnace box was not installed correctly. I called the customer and informed them of the issue. They agreed to have the installation crew come back to fix the issue. I did not charge the customer for the installation crew's return visit.
I was called to a home to check on a cooling issue. Upon arrival, I found that the static pressure was high on the return side, indicating a problem with the air circulation. I explained to the client that we would need to inspect the system further to determine the cause of the problem and provide a solution. I also informed them that we would be in touch with pricing for any necessary repairs.
I was called to a home to address a unit freezing issue. Upon arrival, I found that all the supply vents in the finished basement were closed, and the return drop was covered with a cheater vent. I opened the vents, and the subcooling was good, but the temperature split was not optimal. I adjusted the supply and return air dampers to improve the airflow and temperature distribution. I also checked the condensate drain and found that it was clogged, so I cleared it out and tested the system to ensure it was working properly.
NEED AARON TO RETURN TO REPLACE THE EVAPORATOR COIL AND LINE DRIER FOR A/C SYSTEM. COLLECT PAYMENT WHEN COMPLETE. Replaced evaporator coil and tested cooling works
Coil frozen on arrival due a leaking evaporator. Thawed coil and topped off refrigerant for temporary cooling. Put in parts request for evaporator coil.
Ac maintenance everything checked out good
Ac maintenance everything checked out good
Topped off unit with 4 ounces of R134a
Plumbing maintenance. Asked if there were any concerns. Checked water pipes for leaks. Checked condition of t&p valve. Flushed sediment out of tank. Radon test read 2.43pci