Trevon was thorough in his service and very knowledgable. I have had great experiences with Dor-Mar and their technicians are first rate.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Cindy has been excellent. She is always quick to response and pleasant to work with. I can tell Cindy always Trully cares about customers.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
He was quick, and got the job done. Very friendly too. Thanks again!
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
The best there is! Trustworthy, honest , and very knowledgeable!
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Calob was great! He got the issue fixed quickly and was very friendly.
Overall Experience
Quality
Price
Convenience
David Atla did excellent today (10/27) He came and was nice and personable — as he always is.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Great job as always! Dave even came back to install our UV Light Bulb
Overall Experience
Quality
Price
Convenience
We are very pleased with our service. Normally when you are given a window of time the attendant shows up at the end of the window, but Dave Atha was there right on time, and even could have been there earlier if we hadn't been working. It was an all around great experience. We would like to have Dave as our technician going forward.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
I am a home service technician, and I recently completed a job for a customer. The customer called me to schedule a return appointment for their air conditioner after the coil thawed. When I arrived, I ran the unit in the AC mode and checked the pressures. I found that the unit was low on charge. The customer decided to go through their home warranty and will call back if needed.
I arrived at the customer's home and ran the unit and AC to check for a temperature split. I checked the amps and ohms on both units, checked the wiring, checked the pressure and outside unit, sprayed off the coil, and did a radon test.
Checked a/c it is under size for the home.
Screwed boot back in and put tape around it to give it a little bit of extra strength unit is up and running properly
Unit is operating after replacing a failed capacitor on a 18 degree temp split
Compressor making noise when system turns off… Good amp draws & capacitor. Told them to call if it gets worse
Blower is burning internally and smells. Need to replace
Talked to customer about estimate left behind to fix weak copper line with new valves and fittings plus a repipe . Customer didn’t want the job
Completed ac maintenance system is running properly ready for summer radon fan is making loud noise and not running efficiently need to look into sending an estimate for replacement
During the recent maintenance visit, we conducted a thorough evaluation of the air conditioning system. We initiated the session by inquiring about any specific concerns the customer might have had. The condition of the furnace filter and evaporator coil was assessed, and we recorded the blower amp draw. We also ensured proper airflow by inspecting the cleanliness of the condenser coil outside. Additionally, we examined the electrical components of the condenser for any signs of burnt or loose wires and verified the microfarad readings on the capacitor. Finally, we confirmed that the refrigerant pressures were within the correct range to guarantee optimal system performance
Plumbing maintenance. Asked if there were any concerns. Inspected water pipes for signs of leaks. Checked condition of flue pipe and t&p valve. Inspected burner assembly. Flushed sediment out of tank. Water tank is new and in good shape. Expansion tank is water logged. Customer said he is swapping it out himself
During the recent maintenance visit, we conducted a thorough evaluation of the air conditioning system. We initiated the session by inquiring about any specific concerns the customer might have had. The condition of the furnace filter and evaporator coil was assessed, and we recorded the blower amp draw. We also ensured proper airflow by inspecting the cleanliness of the condenser coil outside. Additionally, we examined the electrical components of the condenser for any signs of burnt or loose wires and verified the microfarad readings on the capacitor. Finally, we confirmed that the refrigerant pressures were within the correct range to guarantee optimal system performance
