Excellent service furnace went out they came out the same day fixed it so it would work til new one came in 2 days very kind considerate and fast
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Garrett was very knowledgeable about my type of furnace, gave me a lot of good advice and recommendations
Overall Experience
Quality
Price
Convenience
I have completed the furnace inspection system and found that the hot water tank is in very bad shape and is falling apart. The customer claims they don't have but barely any hot water.
I am a home service technician, and I recently completed a furnace maintenance job. The furnace was not operating properly, so I checked the system's operation and found that the flame sensor was dirty, causing the furnace to shut down. I cleaned the sensor and checked the amp draw of the blower and inducer motor, which were both within normal limits.
I was part of a team that installed a 12” section of a water main. We used a backhoe to dig a trench and then installed the pipe. We had to make sure the pipe was straight and level, and we also had to connect it to other pipes and valves. It was a challenging job, but we were able to complete it on time and within budget.
I was called to a home to fix a low voltage wiring unit that was not working. Upon arrival, I found that the unit had been installed incorrectly, causing a short circuit. I diagnosed the issue and replaced the faulty component, ensuring that the unit was working properly again. I also provided an estimate for replacing a piece of 12” in the crawl space.
I was working as a home service technician when a customer called to request an estimate for a new roof. I arrived at the customer's home and assessed the damage to the roof. I then provided the customer with a detailed estimate of the cost of the repair work and explained the process involved. The customer agreed to the estimate and scheduled the work for the following week. I arrived on the scheduled day and completed the repair work in a timely manner. The customer was satisfied with the work and paid the invoice in full.
This job involved replacing a heat exchanger and performing maintenance on the AC unit. The customer, Randall Adkins, requested an appointment for the job, and I scheduled it for 134488029-1. The appointment was completed successfully, and the customer was satisfied with the results.
We offer a 10-year parts and 1-year labor warranty on our air conditioners. Additionally, we provide a 20-year compressor warranty. Our air conditioners are designed to provide efficient cooling and heating for your home. We offer a wide range of models to choose from, so you can find the perfect unit for your needs. Our technicians are highly trained and experienced, and we offer a 24/7 emergency service for your convenience. We also offer financing options to make it easy to purchase our air conditioners.
I was working as a service technician for a home service company. I received a call from a customer who had recently purchased a new air conditioning unit and needed it installed. The customer had already paid for the installation but was concerned about the cost of the stop leak that was needed to be injected into the system. I offered to inject the stop leak for free as a courtesy to the customer. The customer agreed, and I completed the installation the following morning.
I recently completed a job replacing a domestic lead line and installing a future tie-on for a fill truck. The job involved 3/4 hang on pipe, a 90-day warranty, and the installation of a pressure relief valve (PRV) to prevent cross contamination. I completed the job successfully, and there are currently no leaks. I will provide an estimate on a near future date.
Ac maintenance everything checked out good
During the recent maintenance visit, we conducted a thorough evaluation of the air conditioning system. We initiated the session by inquiring about any specific concerns the customer might have had. The condition of the furnace filter and evaporator coil was assessed, and we recorded the blower amp draw. We also ensured proper airflow by inspecting the cleanliness of the condenser coil outside. Additionally, we examined the electrical components of the condenser for any signs of burnt or loose wires and verified the microfarad readings on the capacitor. Finally, we confirmed that the refrigerant pressures were within the correct range to guarantee optimal system performance.
Replaced ice maker. Cleared ice from bucket
Repaired wires on the door. Maker still not cycling. Ordered new maker