My tech explained everything in thorough detail along with price. Their process is very transparent.
Brandon was able to come out same day and quickly assess and fix the problem. Quick, easy, good service and a great value!
We have had David for a few things and he’s great! Will recommend we have him each visit go forward. He is honest and puts his customers needs first!
Dave was very knowledgeable, easy to talk to, and knew how to fix the problem.
There were quite a few challenges along the way to the finish line and Steve was able overcome each challenge.
Adjusted and cleared messages from thermostat.
NEED TO INSTALL 600M HUMIDIFIER, REME HALO UV AIR PURIFIER AND EZ TRAP CUT OFF SWITCH. COLLECT PAYMENT WHEN COMPLETE.
Radon levels high. Water heater flushed good, suggest mitigation and maybe a drain cleaning, also gave a in person rough quote to rerun his gas lines if needed
Plumbing maintenance. Asked if there were any plumbing concerns. Checked for any leaks. Drained sediment out of tank. Radon level read 0.78
No failing parts on the 2020 Bryant high efficient up flow furnace. Cleaned flame sensor, vacuumed blower & inducer cabinets, amp draws on both motors are in spec along with ohms on the igniter. Order of operations happened in the proper sequence and the system is operating optimally after maintenance. Customer will be getting an new filter, and the ducts are very clean.
Bad thermocouple. POF for new pilot assembly
Checked system and setting. Checked all connections on the low voltage wires at the air handler and condenser. Adjusted thermostat settings and reset condenser. Blowing good heat no.
Performed furnace maintenance. Completed maintenance checklists.
This is an estimate to replace heat kit. Look over estimate once signed we will schedule installation. Thanks adam. Installed heat strip kit unit is up and running
Sent over estimate to replace heat strip kit. Repaired other hard unit t stat was on gas and wire on w2
Gas ball valve prior to furnace was shut. Opened it, everything’s running great now.
Cleaned coils on both units and added refrigerant system is up and running properly!
Humidifier goes on larger unit, uv lights applied to Return ducts