Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Knowledgeable and took the time needed to do the job right.
Overall Experience
Quality
Price
Convenience
Very satisfied with the job!
Overall Experience
Quality
Price
Convenience
Quick with finding the problem, took the time to explain process and presenting options.
Overall Experience
Quality
Price
Convenience
I was called to a home to repair a furnace that was not working. Upon arrival, I found that the furnace was working fine. I checked the thermostat and found that it was set to "off." I reset the thermostat and the furnace started working again. I tested the furnace to ensure it was working properly and left the home.
I am a skilled professional that works for a Dor-Mar Heating & Air Conditioning company. I recently completed a job where I installed a new heating and air conditioning unit in a residential home. The unit was installed in a tight space and required some creative thinking to get it installed without causing any damage to the home. I worked closely with the homeowner to ensure that the unit was installed correctly and that it was operating efficiently. After the installation, I sent the homeowner an estimate for the new equipment and provided them with a list of maintenance tips to keep the unit running smoothly. Overall, it was a successful job that I was proud to be a part of.
I was dispatched to a home in the suburbs of Chicago to address a problem with a heating system. Upon arrival, I found that the thermostat was not working properly. I diagnosed the issue as a faulty wiring connection and corrected it. Afterward, I tested the system and confirmed that it was now functioning as it should.
I was dispatched to a home in the city to check on a heating and air conditioning unit that was not working. Upon arrival, I found that the power was out to the unit and the electric panel inside was locked. I needed to restore power to the unit to check the hvac meter. I was unable to gain access to the electric panel because the key was not available. I had to call the power company to restore power to the unit.
This estimate is to remove an old garbage disposal and replace it with a new 1/3hp garbage disposal. The old disposal is currently not working properly and needs to be replaced. The new disposal will be installed in the same location as the old one. The old disposal will be removed and the new one will be installed. The old disposal will be disposed of properly.
I am a highly skilled and experienced home service professional. I recently completed a repair job for a client. The job involved repairing a broken door frame and replacing the damaged door. I started by removing the old door frame and replacing it with a new one. I then installed the new door and made any necessary adjustments to ensure it was secure. Finally, I cleaned up the work area and made sure the client was satisfied with the results.
I am a skilled professional that works for a Dor-Mar Heating & Air Conditioning company. I recently completed a routine plumbing maintenance job for a client. During the maintenance, I cleaned out sediment that was in the hot water tank, verified the performance of the hot water tank, and checked the levels of the water. I also checked for calcium buildup on the faucets and showerhead, and everything checked out. The client was satisfied with the job and did not notice any concerns.
As a home service technician, I recently completed a maintenance visit for a residential client. During the session, I began by asking the customer about any specific concerns they had regarding their air conditioning system. We then proceeded to assess the condition of the furnace filter and evaporator coil, recording the blower amp draw. We also inspected the cleanliness of the condenser coil outside to ensure proper airflow. Additionally, we examined the electrical components of the condenser for any signs of burnt or loose wires and verified the microfarad readings on the capacitor. Finally, we confirmed that the refrigerant pressures were within the correct range to guarantee optimal system performance.
I am a highly skilled home service professional who recently completed a routine air conditioning maintenance service. During the inspection, I noticed that the client's compressor was over amping while running and on startup, indicating a failing compressor. I replaced the dirty filter with a new one that the client had, and then I went outside to find the compressor over amping while running and on startup, indicating a failing compressor. The client wanted quotes for a new one, but did not want to replace it yet due to financial reasons. I will talk with the client's husband to see if they are willing to have it replaced while prices are low.
I am a home service technician, and I recently completed an AC and furnace installation for a client. The job involved removing the old furnace and AC unit, installing the new units, and ensuring that everything was properly connected and functioning. I also provided the client with instructions on how to use and maintain their new systems. The installation process took several hours, but the client was pleased with the results.
I am a skilled professional that works for a Dor-Mar Heating & Air Conditioning company. I recently completed a job for a customer who had a 10-year all parts and 1-year all labor warranty. This warranty covers the repair or replacement of any defective parts or components within the heating and cooling system for the duration of the warranty period. The customer was very pleased with the quality of the work and the professionalism of my team.
I performed routine maintenance on a residential air conditioning system. I checked the airflow inside the house and found it to be good. I also checked the outdoor condenser unit and found that the amps and refrigerant levels were within normal ranges. I cleaned the condenser and checked the electrical connections. Everything checked out good.
I was a home service technician who was responsible for repairing and maintaining various household appliances. My job duties included diagnosing issues, replacing parts, and performing routine maintenance tasks. I also provided customers with advice and recommendations on how to maintain their appliances properly.
