For both the A/C units we removed the 10/2 NM-B indoor rated cable and supplied and installed new THWN #10 wire to each unit and back to each breaker. I removed the 6/3 NM-B cable that was in a piece of 1/2 seal tight coming into the bottom of the meter main disconnect, pulled it back inside and re installed it to the back of the cabinet putting this install to proper code. We removed the small pvc junction box by the pool pump panel and installed a bigger one that would allow for proper splices of the wire. We removed the 6/3 cable from the conduit feeding the pool pump panel and supplied and installed new thwn #6 wire and used Polaris lugs to make the splice. We restored power and sealed off all the holes from the house.