For this job I worked on helping homeowner troubleshoot why kitchen outlets aren’t working properly. Turns out they were painted over at some points as well as a BR dual function Breakers are starting to fail. also left a few recommendations.
No Power to the Main Level Office Replacing All The Devices Replacing the Furnace Breaker
Troubleshoot washing machine/replace outlets/splice box
Based on our findings today, it might be time to think about getting a brand new system. Performed one system inspection for upstairs unit. Found failed board, failed capacitor, overheated transformer, dirty blower, bad outdoor cap, dirty condenser coil, rusted electrical connections and no safety. Due to cost or repair and age of unit customer requested estimate for new system. Also signed up for 2 system homecare. Would like to upgrade thermostat as well
Troubleshooting a garage opener not opening. Fou
Customer has 3 y/o 2-zone Carrier heat pump system that operates for whole house. System was not operating due to damaged disconnect, possibly caused by loose wiring. Replaced disconnect. Tested heating and cooling. Tested auxiliary heat. Customer replaced 20x20x1 filter. Pressure levels were normal. Condenser electrical components are good. System is currently working.
Troubleshoot electrical issue. ISSUE: no power LOCATION: whole house FINDINGS:upon arrival I discovered the main breaker in the trip position. After inspecting the outside disconnect and panel a determining there was no damage, I reset the breaker. It’s immediately started making noise so I turned it back off. After cutting on breakers one at a time I determined the issue is with the outside A/C unit. RESOLUTION:customer has an hvac technician they are going to call
