JC was timely and professional. He explained everything thoroughly when presenting options. He was friendly and efficient. Had everything wrapped up and cooling again within an hour. I am very pleased with the work and will definately recommend him and this company going forward.
Overall Experience
Quality
Price
Convenience
Great guy and knowledgeable of his job and took a little extra to check for problems that someone else may have created. Would definitely recommend this company again as long as I can get Jose!
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
I had some concerns about my system, the tech that came out was extremely professional and informative. This company also had a quick turn around for an appointment on short notice, definitely recommend!
Overall Experience
Quality
Price
Convenience
Adam really cares about his customers. Does excellent work and does it quickly.
Overall Experience
Quality
Price
Convenience
Jonah Diaz is a very nice professional young man. A true pleasure to work with. He obviously takes a lot of pride in his work.
Overall Experience
Quality
Price
Convenience
Very thorough in his explanation of what needed to be done and why.
Overall Experience
Quality
Price
Convenience
Definitely will be our new team for all our electrical needs! They were professional, prompt, great service well knowledgeable and educated us! Thank you all!
Overall Experience
Quality
Price
Convenience
Nathan was absolutely AMAZING! He took his time explaining everything and making sure we understood everything that he was saying. Fix all of our issues in a timely manner! 10/10 HIGHLY RECOMMEND!
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Replaced defective power board . Rheem supplied new power board
Performed diagnostics with tech support. Control board is defective. Rheem will mail next control board to customer. Will need to return to replace control board
Arrival is spoke to the customer about an issue of the power not working to the master bedroom and nursery area. The customer had recently replaced some switches and noticed the issue after replacing one of the switches in the bathroom. The breaker was tripping off of a dead short. I quoted the customer diagnostics and within the first minute of diagnostic, I found a broken switch that was causing the short. I replace the diagnostic to the replacement of two switches in the switch box to fix the error. After speaking with the customer, they had a handful of other small issues that they wanted me to look at including the ceiling fan in their master bedroom only working off of one switch and no power in the dining room after customer replaced an outlet in the kitchen. After agreement, I proceeded in changing out the two switches in the master bath. After finishing, I tested and everything tested perfect. Proceeding to the master bedroom fan after opening the fan canopy, I alerted the cus
Completed system evaluation by the time of arrival the client had another HVAC company assessing the issue. Client asked me to perform a diagnosis on the system according to the other company the condensation drain line was clogged over flooding the air handler, and the emergency drain pan after they clear out the drain. There was still water remaining inside the air handle insulation and the water made it through the electrical wire jacket, making it all the way down to the subpanel damaging circle breakers. An electrician from TE was here addressing the problem with the electrical.
For this job I worked on troubleshooting garage breaker and master bathroom/hall bath breaker that were tripping. I tested all connections for proper voltage and inspected wiring on outlets and switches.
Based on our findings today, it might be time to think about getting a brand new system.
For this job, I worked on replacing three customer provided ceiling fans, all on upstairs floor. Also installed a customer provided light fixture in the breakfast room. checked all voltage and connections upon completing, everything is working properly. left a recommendation to install a whole house, surge protector to improve the safety of their home.
SERVICE CALL: upon arrival homeowner stated the heat pump system Is struggling to maintain desired temperature at 69 degrees at the Thermostat. After complete troubleshooting I found the Contractor Grade Heat pump system Goodman 3 1/2 ton capacity 7 1/2 years old Is not working properly due to low refrigerant charge pressures performed Courtesy electronic leak search at the indoor evaporator coil and I found The evaporator coil is leaking refrigerant coil is made of aluminum and can’t Be repaired indoor air handler don’t have any safety for in line float switch Or wet switch blower wheel is getting dirty. System is out of warranty Was five years only on parts. Outdoor compressor start running on high Amperage that’s indication of possible failure. Recommend compressor hard start kit. Life expectancy on system is 10 years old. DUE TO AGED AND CONDITIONS PLUS COSTS OF REPAIRS I RECOMMEND TO UPGRADE SYSTEM. Homeowner wants to get a Quote for complete appointment is set fo
We arrived on Thursday to finish the work of running a new line to the pool pump as well as performing panel maintenance. We met with the dig team on site and they proceeded in running the trench from the inside corner of the house by the back porch area to the right side of the pool. The dig team completed the trench, and we proceeded with running the half inch pipe run. After finishing the run, the dig team buried the line. During their trenching, they cut an irrigation channel that was next to the house in which the dig team was able to repair the corrugated pipe. We dug in a 4 x 4 post at the end of the pipe run to mount the receptacle and piping to. We mounted the piping up the side of the home and ran Romax on the inside of the home to the panel. We completed the transition from THHN to Romax inside of a box mounted at the top of the pipe run. I was able to change out the breakers in the subpanel to make room for the GFCI breaker. I finished the wiring in the panel and we tested
At the time of today’s visit, we were called out to do a leak search under a master bathroom sink due to a home inspector stating there were readings of water under the master bathroom cabinet. After thoroughly examining every drain fitting, as well as testing all water connections to the faucet visually, I was unable to re-create a leak. After checking the water pressure and the thermal expansion in the home there was no issues with either, and I checked the water meter, and there was no signs of any movement. I also used a moisture meter under the cabinet, and there was no evidence of any leak as well.
Finished uf splice. Continuing work on 6/19.
Install hardwired charger with 60a circuit directly next to panel, install new 60a breaker, mount and commission charger. Provide standard Tesla level 2 charger
Came in for no cool call. When testing outdoor pump notice that electrical components were out of range, then proceeded to test compressor windings and found it has failed. defrost boar had burn marks and system had a refrigerant leak. Costumer also mentioned that he is been dealing with the leak for a while now, having to fill up system with refrigerant every 6-8 months Let costumer know about this issues and have him options. Decided to set schedule with comfort advisor Thank for for choosing TE Certifed!
