Customer had water turned off to the.Residence at the meter, when I arrived. Repair was necessary as the water came in directly to the house.You were able to see the hole that the water was shooting out of the ground. The customer previously had most of the water service line replaced and the house repiped, except for the last ten feet of copper that came out of the house. Customer agreed to have a new penetration, done.And replace the remaining copper, which was roughly ten feet on the outside of the home. I dug up the old line all the way to the pex fitting. I then uninstalled both on the outside and inside of the home.And installed and sleeved a new waterline going into the home and used stainless steel fittings on the outside of the home. I pressure tested and made sure that the house was flowing properly. I then sealed the sleeve, waited to dry and then hydraulic cemented inside and out. Waited to dry and then tarred inside and out. Waited to dry and backfilled. Thank you for choo