The homeowner called to have the angle stops in the powder room on the main floor replaced. I replaced the angle stops for both the lavatory sink and the toilet with new quarter-turn valves, as the old ones were recalled combination supply line valves. Additionally, I replaced the pressure regulator for the homeowner's peace of mind and set the new regulator to 65 psi. In the master bathroom, I replaced the straight stop combination valve and supply line for the toilet with a new straight stop and supply line. I also removed and reset the master bath toilet to ensure that the flange was not broken, as it was wobbly. After confirming the flange was fine, I reinstalled the toilet using new wax bolts. Once everything was completed, I tested all the connections and checked for leaks.