The homeowner experienced a water leak originating from a penetration in the house, which was leaking into the basement. I began by digging in front of the hose bib where the water main enters. I discovered an 1 1/4 PVC pipe that had been previously repaired. It appeared that whoever performed the repair had not used enough glue, causing the pipe to disconnect. Additionally, the copper pipe passing through the penetration was kinked and needed replacement. I transitioned from the 1 1/4 PVC to 3/4 soft copper and replaced the main shut-off valve inside the homeowner's house. After completing the repairs, I sealed both sides of the penetration with hydraulic cement and roofing tar. Finally, I tested the system and checked for leaks to ensure everything was secure.