Each table has a switch to turn on the control panel and the switch at the 1st table to the right had failed and was broken. I removed the panel at the table and found a receptacle when the table plugs into, I tested voltage in-between each leg of the switch and got 120v. I jumped the terminals and the table turned on. Due to the unique switch I informed the manger that I could get the table working again with a different set up. I installed a new surface mounted box, decora single pole switch and a plate. After installing I turned the switch on and showed the manager that it is working again. I informed him that if they can find a replacement switch that matches the rest of the tables that we would replace it at no additional cost. Inside the GE secondary panel I found (2) non listed breakers. Having non listed breakers could result in the buss bars being damaged and the panel would have to be replaced. I sent over an estimate for the repairs.