As we arrived back here, Thursday, December 11 and 12th we’ve come back to finish installing power to the rooftop fans once they’re set in place. We also had to install fan motor controls, which was not part of the original estimate inside the warehouse. On the rooftop from the weatherproof box and rigid pipe that we stubbed up through the roof, we ran liquid type metal flex and wire from that box over to a motor switch that we installed on a weatherproof box and Uni strut for each of the fans. From the motor switch, we installed liquid type metal flex and wire all the way to the three phase motors, controlling power to the exhaust fans. Made all connections inside of the motors and on the motor switches. In the upstairs break room, we had to cut the previously installed pipe that we ran on the last trip here. We put two 1900 junction boxes on that pipe. Installed a piece of plywood on the wall where we could mount the new fan control boxes. We installed both VFD fan control boxes and