For today’s job, I performed an extensive troubleshooting session on multiple chandelier lift systems throughout the home. In the dining room, I found the lift motor was incorrectly wired—specifically, the line-side neutral was connected to the switch leg neutral, and the switch leg neutral was wired to the motor neutral. I corrected the issue by re-tapping the neutrals to their proper connections. Additionally, the key switch controlling the lift had a loose connection; I resolved this by securing the low-voltage wiring to ensure reliable contact with the lift motor. It was also noted that the dining room lift is installed too low, causing the electrical box to protrude from the ceiling. In the living room (adjacent to the fireplace), I discovered the lift was raised too high in the attic, preventing the ceiling contact plates from making proper electrical connection. As a result, the chandelier is not receiving power. The entire lift assembly will need to be lowered so the box sits f