This estimate will involve pulling permitting for the replacement of the disconnect, as well as performing the work with the meter still energized. This would be the only way to have the power returned today due to Georgia Power‘s backlog of calls. We will remove the existing disconnect and install a new disconnect with 125 amp breaker. This work will be inspected later upon completion. Through a text message on Tuesday night around 10:30. The customer decided that they wanted to go ahead with the estimate that was adjusted with the Sandy Springs permit instead of Atlanta. I had trouble obtaining materials, but after arriving, I started by pulling out the previous disconnect after using the meter to turn off power. After removing the previous disconnect, I found that the previous installer had punched out the 2 inch hole but left the ring of the punch out for the one and a half inch. After requiring a 2 inch hub and a 2 inch chase nipple as well as a one and a half inch Chase nipple