Today I replaced a total of 10 devices. There were five outlets, three single pole switches and two three-way switches. Three of the switches are located on your right hand side before you enter the living room from the hallway in a three gang switch box. The other two switches are located by the back door. The outlets are located as follows; one down to your right in the hallway on the main level, one under the window on the back wall, one on each side of the TV on the left hand wall and one down to your left as you enter the living room from the hallway. The diagnosis on circuit number 11 was waived due to more work being performed. Note: The outlets were replaced due to the stab in the back method of installation. Which can easily trip a dual function breaker. TE certified is not responsible for existing wiring in the home tripping the new dual function breakers?