Install new 50 gallon electric short water heater and remove old failed water heater. In order to do this I will be using the old gate valve above the unit to shut off the water going into the old water heater. If this gate valve does not function properly I will not be able to perform my work. After installation everything has been checked for leaks and functionality. *in order for this water heater to pass inspection an electrician is required to install a disconnect box in the same room as the water heater. This is NOT included in the quote* *The pressure in the home is significantly higher than the code required 45-80 psi. I strongly urge the customer to look replace the PRV. In order to replace the PRV it will require using the old buried gate valve in the back yard to shut down 2 townhomes at once. Because it is required to use this valve, myself or TE will NOT be able to perform this repair.*