I came out today to complete the following work: -Lighting- At the bottom landing of the stairs I wires in a new location 4” LED wafer light at the bottom of the stairwell off the existing 3way switch. I pulled the switch leg from the attic can and came down the wall and center of the ceiling. After installation of the fixture I supplied and installed a 15 amp CH duel function on circuit #4. The customer is aware that I had to cut the drywall due to the floor joists. I tested both the safety feature of the breaker along with the lights and they are working. -Stove- The customers stove would not push back against the all all the way and this was due to the surface mounted 3 pin range outlet. I went into the crawl space and found the wire. I pulled it down and drilled up into the wall I secured the wire to the bottom of the floor joists. I installed a new box, 3 pin range receptacle and a new plate. I was able to push the stove all the way back against the wall and the customer is hap