Responded to service call for pilot light repeatedly extinguishing in aging furnace. Upon inspection, discovered significant heat exchanger deterioration with visible cracking and corrosion, along with a failing blower motor with loose belt. Recommended full system replacement as repair costs would approach replacement value. Set up emergency replacement service due to safety concerns.
Responded to service call for leaky tub faucet. Upon inspection, found deteriorated shower valve cartridge with significant mineral buildup. Removed old Moen cartridge and replaced with customer-supplied replacement part. Successfully restored proper function and eliminated leak.
Completed routine maintenance on 12-year-old Payne furnace. Verified system is operating safely with proper gas pressures, clean filter, and good electrical connections. Performed flame sensor cleaning, ignitor verification, and confirmed inducer amp draw, capacitor readings, and clear condensation drains. No gas leaks detected.
Completed installation of a new main water service valve (up to 1") before the meter and replaced the frost-free hose bibb utilizing existing connections. Service included complete repiping of the meter/main valve assembly and installation of a new exterior frost-proof spigot with proper interior piping through the wooden framing structure.
Diagnosed and repaired a water leak at the valve connection on pipe leading to exterior faucet. Observed significant corrosion and deterioration on copper pipe with damaged insulation and water damage to surrounding wooden structure. Provided bid for main line rebuild due to extensive system deterioration.
Replaced customer-supplied Rheem Performance water heater (Model #XG50T06EC38U1) after original Bradford White unit developed tank leak. Installation included connecting all plumbing lines and testing system. Post-installation inspection confirmed proper operation with no leaks detected.
Responded to no cooling complaint for aging Samsung mini split system. Diagnostic testing revealed complete power loss to the unit, which was also noted to be extremely dirty. Scheduled follow-up appointments for both an electrician to inspect the electrical box and a sales appointment for Tuesday to address the system's condition.
Successfully installed a new Bradford White tanked water heater in customer's utility room. Connected all necessary copper water lines, including hot and cold connections with appropriate valves. Ensured proper venting and confirmed unit was functioning according to manufacturer specifications before completing the job.
