They do all of our plumbing repair, fixed our furnace so many times that we had them replace it and put a new air conditioner in! Very professional.
Response from Hurlburt Heating & Plumbing:
So glad we were able to help with your plumbing and heating repairs. Thank you for the 5-star review.
Overall Experience
Quality
Price
Convenience
This company does it right, our air conditioner hadn't been serviced in like 5 years, I can't believe how much better it runs now.
Response from Hurlburt Heating & Plumbing:
We are so glad Ernie did a great job on your HVAC Service. We will be sure to share your kind words with him!
Overall Experience
Quality
Price
Convenience
A very nice guy, Ernie I think, took really good care of us.
Response from Hurlburt Heating & Plumbing:
It was a pleasure serving you and your family. We really appreciate you taking the time to share your feedback!
Overall Experience
Quality
Price
Convenience
I have never used this company before, but I'll definitely use them again.
Response from Hurlburt Heating & Plumbing:
Thank you for the wonderful review and for taking the time to share your feedback.
Overall Experience
Quality
Price
Convenience
I couldn't find anyone to come out on a Saturday, Hurlbert did though!
Response from Hurlburt Heating & Plumbing:
We are so grateful for your kind words.
Overall Experience
Quality
Price
Convenience
Responded to emergency no heat call where residence temperature had dropped to 35 degrees. Diagnosed ice blockage in exhaust vent of heating system (installed August 2025). Cleared obstruction by creating drainage hole, restoring system functionality. Noted need for improved venting solution to prevent future freezing issues.
Responded to no-heat call for an aging oil furnace (65+ year old home). Diagnosed intermittent ignition failure in the primary oil control system. Found significant wear on Honeywell limit control switch and deteriorated components with visible oxidation. Replaced faulty igniter and primary control, restored proper cycling sequence, and verified consistent ignition. System now operating normally, providing reliable heat.
Responded to service call for a plugged toilet reported as "exploded." Upon inspection, found significant mineral deposits and waste buildup in the toilet bowl. Performed snaking procedure to clear the obstruction. No additional plumbing issues detected elsewhere in the home. Recommended toilet replacement due to extensive staining and potential ongoing drainage issues.
Performed installation of a salon shampoo bowl, connecting it to existing plumbing system. Ensured proper drainage functionality with appropriate strainer installation. Completed connection work with all fixtures properly secured and tested for leaks.
Responded to no heat complaint for a residence with dual furnace system. Diagnosed frozen exhaust vent on ICP furnace causing intermittent operation and breaker trips. Cleared ice blockage from exhaust pipe, restored proper operation, and verified functionality of both the ICP and Gibson furnaces.
Responded to no heat call where furnace was continuously blowing cold air. Diagnosed tripped inducer limit switch, likely caused by temporary exhaust frost during extreme cold (-40°) conditions. Performed comprehensive system inspection, monitored operation for 30 minutes with no recurrence of overheating issue. System now functioning properly; advised customer to monitor performance.
Responded to a no-heat service call for an aging HVAC system. Upon arrival, observed the fan was operational. Performed multiple system cycles, inspected internal components, and tested the flame sensor which showed normal readings. System appeared to be functioning properly during the service visit. Advised customer to monitor the unit for any recurring issues.
Responded to no heat complaint where furnace initially made loud noise before shutting down, then failed to start completely. Diagnostic testing revealed locked inducer motor. Sourced replacement part from JH Larson, installed new inducer motor, and verified proper system operation. Thermal imaging confirmed normal operating temperatures after repair.
Responded to no heat complaint at rental property. Inspection of aging furnace revealed significant issues with the collector box seal at the inducer motor connection, allowing leakage. Performed comprehensive heat exchanger inspection including scope examination and diagnostic drilling, with no visible cracks or pitting observed. Discussed findings with property manager regarding limited repair options due to internal collector box location being attached directly to heat exchanger.
Responded to no heat complaint on aging furnace system that was repeatedly cycling on and off. Diagnostic inspection revealed the exterior exhaust pipe elbow was improperly installed without adhesive, allowing condensation to freeze and block proper ventilation. Applied silicone sealant to create proper seal on the exhaust pipe elbow and advised tenant about possible need to remove ice accumulation during extreme cold temperatures.
Performed inspection of four PTAC units (in units 1, 10, 12, and 15) following customer complaints about excessive noise disrupting sleep. Diagnostic assessment revealed deteriorating blower motors in all four units causing the noise issues. Documented condition with photos and informed customer that estimates for replacement motors would be provided.
Assessed basement construction project where lineset from furnace to exterior conflicts with planned bathroom framing. Documented current installation with exposed PVC plumbing, metal ductwork, and copper lineset routing issues. Relocation of copper line required; recommended scheduling installation team to determine appropriate rerouting solution for HVAC components.
Responded to service call for residential Rheem water heater not producing hot water. Diagnosed issue as gas valve lockout due to activated flammable vapor sensor. Customer had placed toilet cleaning products and brush near vapor sensor, triggering safety shutdown. Contacted technical support to reset gas valve and restore proper functionality. Educated customer on proper storage of cleaning chemicals away from water heater to prevent future lockouts.
Responded to no heat call for 15-year-old Gibson furnace unable to maintain temperatures above 65°F. Diagnostic revealed slow blinking yellow indicator light and plugged condensate trap. Performed maintenance by cleaning flame sensor with Scotch-Brite pad and clearing blocked drain line, which restored proper operation. Monitored system until temperature reached 67°F, confirming successful repair.
Responded to no-heat call where furnace was operating but home temperature was dropping despite thermostat set to 80°F. Diagnosed code 311 (reduced airflow) and discovered one closed return vent. Replaced air filter, opened all supply and return vents, and verified gas pressure was properly adjusted. Home temperature increased approximately 5° before departure. Noted possible system oversizing and recommended potential addition of basement return grill for improved makeup air if issues persist.
