Came out for a no cool. Ran diagnostic on single system home. Found out the thermostat does not send voltage for the blower motor. Jumped out blower motor on furnace board found the motor is also seized up. Had to kickstart it in order to get it up and spinning. Added clean out to drain line, cleared drain line with mighty pup and 2 gallons of water. Found that the filter is not currently in. incorrectly is also the wrong size does not have an actual filter rack on the system. Contactor is pitted outdoor coil is very dirty. Compressor is over amping. Customer elected to get estimates from install supervisor to replace system. Based on our findings today, it might be time to think about getting a brand new system.