Picked up the material from Apex Supply Marietta. Arrived at the customer’s home to complete quoted repairs. Installed a collar on the 10” return duct that is not connected. Secured the duct to the return plenum with screws and silver tape. Took apart the outdoor unit and rinsed it off with water. Removed leaves and debris from inside the outdoor unit. Cleaned the condenser coils with condenser coil cleaner and put the unit back together. While here, the customer mentioned an exposed wire at the outdoor unit. Quoted to perform the repair and got approval from the customer during today’s visit. Removed the old frayed outdoor unit wire. Ran a brand new thermostat wire between the furnace and condenser. Tested operation to ensure everything functions properly. Reported findings to the customer.