Picked up the material from Mingledorff’s Marietta. Arrived at the customer’s home to complete quoted repairs. Removed the refrigerant from the system. Used the torches to sweat the old coil out. Removed the insulation and mastic and completely removed the coil. Removed the old filter drier. Installed the replacement evaporator coil and filter drier. Pressure tested with over 200 psig of nitrogen. Pulled a vacuum on the system down to 600 microns and performed a decay test. Sealed the new evaporator coil to the furnace and plenum. Added 7.5 lbs of R-410A into the system and ensured it has the proper charge (sub cooling is now 10). Tested the temperature difference between the supply and return, which is now 17 degrees. Installed a wet switch and SS1 on both systems and tested operation. Reported the results to the customer. Signed the customer up for the Homecare maintenance plan and applied the 10% discount.