Due to high winds a tree fell down by the house bending the service mast pipe and pinching the wiring that was feeding the home. We removed the broken pipe and damaged wire and supplied and installed a new mast, wire, weather head and a new mast clamp. When the tree fell down it also pulled out the wire feeding the machine shop and we found that a 12/2 wire was spliced onto this feeding power to what i believe is the old car port. The customer will let us know when the power is restored what is not working. We also removed this wire from the panel due to the extensive damage to the wire. We pulled a permit and the inspector should be by tomorrow for the inspection. At the panel we removed two sets of wires that control the heat pump and furnace and routed them properly into the panel so we could install the panel door. We did this at no additional cost. We turned the main breaker back on along with the other breakers and the homeowner is to inform the power.