During our visit, the customer mentioned that a leak appeared to be coming from the hot water pipe coming from the water heater. Upon inspection I noticed a pinhole in the uponor pex hot water pipe. I then checked the water pressure and the expansion tank. The water pressure was around 60 psi but the expansion tank bladder was ruptured. I spoke with the customer about solutions. Multiple estimates were provided and presented. An estimate was approved for a repair to be made. A new thermal expansion tank was installed and pumped up to 70 psi. The tank was also mounted to a bracket. The pinhole was repaired on the hot side of the water heater. These repairs were tested for leaks and functionality after completion. Thanks for choosing Te Certified!!