On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.