-Stove- The customer was using an extension cord to power the gas stove so in order to correct this I completed a 240v to a 120v conversion behind the gas stove. Install a new duplex outlet, box and plate. Per 210.8 of the NEC install a new 20 amp single pole GFCI breaker. I removed the 2p50 at 1&2 of the panel board and installed the new duel function breaker on circuit #1 -Panel- I removed the old 2p30 General Switch breaker that is for the dryer and supply and installed a new breaker. I also installed a connector at the bottom right of the panel and a 1/2 KO seal at the top right of the panel. As a courtesy I made sure all the connections were tight on the breakers. -Basement- I replaced a damaged outlet in the basement on right wall just beneath the cloak. I also supplied and installed a new duel function breaker that supplies power to the basement outlets. -Kitchen Counter Outlets- There are (3) GFCI outlets in the kitchen and the customer stated that they would trip. I shut t