Performed a Homecare maintenance inspection on both HVAC systems in the home (upstairs and downstairs). Tested heating from the thermostats. Measured the electrical component readings. Inspected the safety and cleanliness of the systems. Checked the gas pressures to ensure they are correct. Checked and replaced the air filters. Found that the downstairs furnace is not heating due to a failed Ignitor. Reported findings to the customer. Customer approved to perform repairs on both systems. Picked up the material from Mingledorff’s Norcross, Apex Supply Marietta and TE Certified Kennesaw. Arrived back at the customer’s home to perform quoted repairs. Removed the old failed Ignitor from the main floor furnace. Installed a brand new replacement Ignitor. Tested operation to ensure the system now heats properly. Removed the blower from the furnace and brought it outside to be cleaned with both condenser coils. Cleaned the blower motor. Removed the broken section of flue vent on the upstairs