We've returned to install a single handle shower valve that we supplied in the basement bathroom.As well as install a new fifty gallon gas, water heater and prv. We also installed a garbage disposal and replum.The drainage for that same fixture. Lastly, we unclogged a widespread faucet in the master bathroom on the left hand side. We did all of this by first.Starting with turning the water off inside of the home and removing the prv.And replacing it. We then took out the old water.Heater. Installed a new one and had to rework the gas. As there were multiple fixtures on the same half inch line. We found the three quarter inch line and ran a singular line for the water heater itself. Plumbed in and vented, the new water heater. We then and installed the old single handle shower valve by cutting in a one foot by one foot hole in the sheet rock behind the shower and cutting out the old valve.And installing a new one. Afterwards we turned the water back onto the house and primed everything.