Today I came out for 1 system Home Care. Furnace is located in the garage. I inspected all electrical components, checked gas pressures, static pressures, blower wheel, evaporator coil, heat exchanger, duct work, cleaned flame sensor, cleaned inducer draft tubing, changed the filter, and cleared drain lines. Blower wheel has dust and debris build up on fan blades. Both supply and return ducts have dust and debris all throughout. There is a humidifier on the system and there is just standing water in the humidifier pan. This is increasing the humidity in the house. There is biological growth forming on top of the evaporator. The filter is positioned diagonally and is allowing unfiltered air to pass through. For the condenser, I checked all electrical components, coils, and refrigerant pressures. Condenser coil are heavily impacted with dirt and debris. I noticed the dryer vent is heavily impacted with lint. After going over all my findings and options, Brooks has agreed to have Option