A customer had a very slowly leaking solder joint right next to the emergency shutoff valve for the basement side entrance hose bib. This didn't appear to cause any damage of note. Customers pressure was at sixty p s I. A customer agreed to have the shut off valve. It replaced and moved to an area where he could shut it off.In the drop down ceiling. Turn the water off to the house and drained the house down completely. Afterwards, I cut out the old hose bib and replace the hose bib with a roughly 5 inch section of half inch copper. And then moved the new hose bib onto the exact same line up in, drop down ceiling. Afterwards, I slowly turned the water back on and primed everything. And check the fixtures that we turned on for proper flow.Afterwards, and to make sure that their aerators were free.And clear. I then inspected my work for leaks.No leaks. Walked through with the customer and answered any questions.They had. Thank you for choosing and trusting t e with your plumbing needs