He was knowledgeable and did a very professional service. He was very friendly and courteous.
Response from Comfort Experts Inc.:
We're thrilled to receive your 5-star review! It's wonderful to hear our Haltom City, TX, electrician expertly handled your electrical project. We strive to provide top-quality workmanship and excellent customer service. Thanks for the great feedback!
Dakota was very professional and knowledgeable. Explained things to me that no one had before. I would request him again.
Colby F. is a very good technician and is very Knowledgeable on the equipment and what he is doing.
Great service the only thing I didnt care for was trying to sell me a Uv light for my system. They always try to sell me something like this every time and I just want them to come out and do their maintenance work or whatever they were called out for not to try and sell me something.
I called at 7am on a Sunday and my ac was fixed by 11:30 for a minimal fee. The ac guy was super knowledgeable and very polite. Signed a maintenance program with them because of it
Jose and Craig showed up about 8:30am and didn't leave until nearly 6:00pm. Jose was up in the inferno of an attic all day! Craig dealt with the electrical and disposing of the old unit and setting up the new one. These guys didn't seem to take any breaks or bathroom otherwise I was about to fall out and I was just sitting on the front porch. The house was being repaired and the electricians refused to turned everything on. In spite of that, I had no cold air coming into the house that my new thermostat said 97 degrees inside. Both of these young men are knowledgeable and very hard workers. Hobson is blessed to have them and so was I!
Got a good deal; no, I got a great deal Lennox would be my first choice; and it was cheaper than most!
Steven was very informative and professional.
Steven was great. Found the problem and fixed it fast. Thanks
Adam was quick, knowledgeable, and very respectful and friendly too! Highly recommend!
Jhorden with Comfort Experts came out to install a new heating and air conditioner at our house. He was very knowledgeable and friendly. He was very thorough and did an excellent job. We would highly recommend Jhorden and this company to anyone
Arrived onsite customer has a leak under the home that needs to be addressed. The water service is galvanized recommended replaced the water service to under home connection. Customer is going to talk to wife and get back to me tomorrow on what he decides.
Arrived for STU replaced filter Drains clear Furnace components fine except flame sensor is degraded Replaced today Biological growth present in the supply plenum due to current UV bulb way out of date Upgraded to IAQ200. Pulled and cleaned blower with install Condenser coil clean Motors, refrigerant, and capacitors are fine
Upon arrival customer stated system will not keep up. During evaluation found that the system was freezing up while running. Leaked search the coil as best as possible, unable to find leak in areas that did not have a huge ice section. evaporator coil is also halfway cutoff from any airflow so the bottom isn't getting proper airflow. Coil needs to be reinstalled with a transition and needs to have a new txv as well. Customer wants to talk with brother who bought the equipment first before making any decisions Caused some damage so pausing for now
Made requested estimate, called customer but went to voicemail.
Quoted both switches for portable generator Interlock switch $2,250 Manual switch $3,800 Whole home 14k generator $18,000 plus
On arrival system was fully shut off to low pressure. Leak searched entire system, found leak in lower left side of evaporator coil. Showed homeowners video. Sent email with coil options and membership information.
Upon arrival - water flowing from secondary line Found primary drain line clogged - no water built inside of emergency drain pan Cleared drain line from sink to unit Installed microbial treatment strip System functioning and drain line tested System left on cool at exit
Arrived for rec work Added zone bypass Added ceiling return Replaced thermostat with customer supplied ecobee Run tested in heating and cooling just fine Biological growth is present in small amount in the supply plenum Declined for now
Arrived for service eval Thermostat no longer sending W to the zone board Homeowner will order new thermostat and we will install on return visit Zone system has no zone bypass Ordering 16inch duct and barometric bypass Return duct undersized Ordering 14 inch duct with ceiling return to add proper amount of return to the system Return will be added in the ceiling of the upstairs living room Panel surge protector installed today
Arrived onsite customer had some bids to repipe her home and will send to her daughter who is paying for it. Customer had a bid from baker brothers to repipe whole home for 6971.00. Customer said she was not quoted a service fee
On arrival outdoor unit was not getting high voltage from the electrical panel. Breaker was not tripped. Reset it twice and it would not pass power. On the third try it began passing power to condenser but will need to be replaced. I found the current filter doing a poor job preventing dust bypass as evidenced by the candy wrapper on the evaporator coil. I also found bacterial growth in supply plenums. I recommended replacing the breaker, and adding an April aire filter upgrade kit that will prevent dust bypass and has a lifespan of 8 months minimum per filter. I also recommended a uvc system to kill viruses, bacteria, mold, and mildew before it enters air flow. Unable to contact homeowner at this time.
Arrived for CTU replaced filter Drains clear Blower and coil are clean Biological growth on the X13 plug and in the supply plenum Declined UV for now Washed condenser coil Moved low voltage wires off of the TXV tubing to prevent rub out failure Capacitors, motors, and refrigerant fine
On arrival condenser disconnect was off. Turned on and waived service fee.
Performed super tune up Washed condensor and tightened connections Delta 18 All cooling and heating components are in tolerance Filter was recently replaced Reccomended soft start upgrade System left on cool at exit