Tech Cody and Hunter arrived to customer's home, we met Mr Coates and he directed us inside to the indoor unit and thermostat. Cody started the inspection inside while Hunter went outside to start the washing of the condensing coil. Inside we found the evaporator coil would be cleaned, the blower wheel to be cleaned and the capacitor for the blower motor to be in tolerance, and the filter was not in need of changing. When the unit was turned on to heat the furnace went through all its safeties and all burners turned on without any issue. There was a fixed metering device installed, along with drain protection for the evaporator coil. Outside after the condensing coil had been washed we took our electrical readings, there was no hard start kit installed and this was reflected with a high in Rush amp test. The running amps test for the compressor and fan motor both came back below manufacturer specifications, the capacitor was in tolerance Any condition of the contactor was good. After w