Tech Cody arrived to customer's home and met Mrs.Messinger. she guided me inside to the thermostat and indoor unit, the system was running but not cooling. When I hooked up my guages to test for refrigerant pressures, I found that the pressures were almost equivalent. I tested the TXV for constriction as well as the filter drier and found both to be operating normally. I then tested the electrical control outside which was operating normally. I then took an amp draw of the compressor and noticed it was running at only 1.06 amps, far below normal operation. I tested the windings of the compressor and found them to be in good condition so this left me with the conclusion that the compressor had mechanically failed and was not pumping the refrigerant properly. When talking to the home owner I presented my findings and she decided it would be best to set up a meeting with a comfort advisor for replacing the current system.