Tech Cody Brooks arrived to customer's home. I meant Mrs Gracia, and she directed me inside to the thermostat and showed me the attic access in the garage. I started with the indoor unit in the Attic, I replaced the filter for the customer and then opened up the cabinet to start my inspection. The coil looks clean and shows no sign of rusting, and the blower wheel also looked clean as well as the blower motor. I did notice that there was signs of microbial growth in the cabinet and that the homeowner had no UV light installed. I then tested the heat strips and found that they came back with intolerance so I buttoned up the unit and headed outside. I started outside with washing down the coil, and then let it run for 15 minutes to dry out before taking my refrigerant readings. The inrush amp test came back below specifications according to the data plate and the homeowner had a compressor saver installed. The running amp test for the motor and the compressor also both came back well bel